Clarion DXZ558RMP Uživatelský manuál stáhnout pdf (Strana 12)

14 DXZ558RMP

280-8142-00

English

Radio Operations

Listening to the radio

1. Press the [SRC] button and select the radio

mode. The frequency or PS appears in the

display.

∗ PS: Programme service name

2. Press the [BND] button and select the radio

band. Each time the button is pressed, the

radio reception band changes in the following

order:

FM1 ➜ FM2 ➜ FM3 ➜ AM (MW/LW) ➜ FM1...

3. Press the [a, d] lever upward or

downward to tune in the desired station.

Tuning

There are 3 types of tuning mode available,

seek tuning, manual tuning and preset tuning.

Seek tuning

There are 2 types of seek tuning: DX SEEK and

LOCAL SEEK.

DX SEEK can automatically tune in to

receivable broadcast stations; LOCAL SEEK

can tune in to only broadcast stations with a

good reception sensitivity.

1. Press the [BND] button and select the

desired band (FM or AM (MW, LW)).

2. Tune into a station.

∗ If “MANU” is lit in the display, press and hold

the [BND] button for 1 second or longer.

“MANU” in the display goes off and seek

tuning is now available.

∗ If “TA” is lit in the display, TP stations are

automatically sought.

●DX SEEK

Press the [a, d] lever upward or downward to

start automatic station tuning.

When the lever is pressed upward, search will

be performing in the direction of higher

frequencies. When the lever is pressed

downward, search will be performed in the

direction of lower frequencies.

∗ When seek tuning starts, “DX” appears in the

display.

●LOCAL SEEK

If the lever is pressed upward or downward and

held in position for 1 second or longer, local

seek tuning will be enabled. Broadcast stations

with good reception sensitivity are selected.

∗ When local seeking starts, “LO” appears in the

display.

Basic Operations

Adjusting the Z-Enhancer Plus

1. Press the [Z+] button and select the Z-

Enhancer Plus mode to adjust.

2. Press the [A-M] button and turning the

[ROTARY] knob clockwise adjusts in the +

direction; tuning it counterclockwise adjusts

in the – direction.

●When “B-BOOST 0” selected, you can ad-

just the bass in the range of –3 to 3.

●When “IMPACT 0” selected, you can ad-

just the bass and treble in the range of –3

to 3.

●When “EXCITE 0” selected, you can adjust

the bass and treble in the range of –3 to 3.

∗ When Z-Enhancer Plus is selected, press and

hold the [Z+] button for 1 second or longer to

change to the “CUSTOM” mode.

Bass/treble characteristics become flat and

“Z+ FLAT” is shown in the display.

Press the [Z+] button again to change to the

“Z+ OFF” mode.

Adjusting MAGNA BASS EXTEND

The MAGNA BASS EXTEND does not adjust

the low sound area like the normal sound

adjustment function, but emphasizes the deep

bass sound area to provide you with a dynamic

sound.

1. Press and hold the [A-M] button for 1 second

or longer to turn on the MAGNA BASS

EXTEND effect. “M-B EX” lights in the

display.

2. Press and hold the [A-M] button for 1 second

or longer to turn off the MAGNA BASS

EXTEND effect. “M-B EX” goes off from the

display.

∗ The factory default setting is off.

CT (Clock Time) function

The CT function receives CT data sent from an

RDS station and displays the time. Press the [D]

button to switch to the CT display.

∗ If a CT data is not being received, “CT––:––”

appears in the display.

Note:

• CT data is not transmitted in some countries and

by some broadcast stations. Also, in some areas,

the CT may not display accurately.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 29 30

Komentáře k této Příručce

Žádné komentáře

Clarion DXZ558RMP Uživatelský manuál Strana 12

Komentáře k této Příručce

Související produkty a manuály pro CD přehrávače Clarion DXZ558RMP