Clarion DXZ558RMP Uživatelský manuál stáhnout pdf (Strana 10)

12 DXZ558RMP

280-8142-00

English

6. OPERATIONS

Basic Operations

Note:Be sure to read this chapter referring to the front diagrams of

chapter “2. CONTROLS” on page 5 (unfold).

CAUTION

Be sure to lower the volume before

switching off the unit power or the ignition

key. The unit remembers its last volume

setting. If you switch the power off with the

volume up, when you switch the power back

on, the sudden loud volume may hurt your

hearing and damage the unit.

Turning on/off the power

Note:

• Be careful about using this unit for a long time

without running the engine. If you drain the car’s

battery too far, you may not be able to start the

engine and this can reduce the service life of the

battery.

1. Press the [SRC] button.

2. The illumination and display on the unit light

up. The unit automatically remembers its last

operation mode and will automatically switch

to display that mode.

3. Press and hold the [SRC] button for 1 second

or longer to turn off the power for the unit.

Note:

• The first time this unit is turned on after the wire

connections are completed, it must be checked

what equipment is connected. When the power is

turned on, “SYSTEM CHK” appears in the

display, then “TUNER” appears in the display and

change to radio mode.

Selecting a mode

1. Press the [SRC] button to change the

operation mode.

2. Each time you press the [SRC] button, the

operation mode changes in the following

order:

Radio mode ➜ DAB mode ➜ CD/MP3/WMA

mode ➜ CD changer mode ➜ DVD changer

mode ➜ TV mode ➜ AUX mode ➜ Radio

mode...

∗ External equipment not connected with

CeNET is not displayed.

∗ If AUX is set in AUX/TEL, AUX mode can be

selected.

Adjusting the volume

1. Press the front part of the [ROTARY] knob.

The knob will pop up.

2. Turning the [ROTARY] knob clockwise

increases the volume; turning it

counterclockwise decreases the volume.

∗ The volume level is from 0 (minimum) to 33

(maximum).

Switching the display

Press the [D] button to select the desired display.

Each time you press the [D] button, the display

switches in the following order:

Main display ➜ Title display ➜

Clock (CT) display ➜ Main display

∗ Once selected, the preferred display becomes

the display default. When a function

adjustment such as volume is made, the

screen will momentarily switch to that

function’s display, then revert back to the

preferred display several seconds after the

adjustment.

∗ For information on how to enter a title, refer to

the subsection “Entering titles” in section

“Operations Common to Each Mode”.

∗ When CT data is not received, “CT––:––”

appears in the display.

Setting the Z-Enhancer Plus

This unit are provided with 4 types of sound

tone effects stored in memory. Select the one

you prefer.

∗ The factory default setting is “Z+ OFF”.

Each time you press the [Z+] button, the tone

effect changes in the following order:

“Z+ OFF” ➜ “BASS BOOST” ➜ “IMPACT” ➜

“EXCITE” ➜ “CUSTOM” ➜ “Z+ OFF” ...

• BASS BOOST : bass emphasized

• IMPACT : bass and treble

emphasized

• EXCITE : bass and treble

emphasized mid de-

emphasized

• CUSTOM : user custom

• Z+ OFF : no sound effect

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 29 30

Komentáře k této Příručce

Žádné komentáře

Clarion DXZ558RMP Uživatelský manuál Strana 10

Komentáře k této Příručce

Související produkty a manuály pro CD přehrávače Clarion DXZ558RMP