Clarion DXZ558RMP Uživatelský manuál stáhnout pdf (Strana 11)

280-8142-00

DXZ558RMP 13

English

Adjusting the tone

Press the [A-M] button and select the item to

adjust. Each time you press the [A-M] button,

the item changes as following order:

●When “BASS BOOST” is set

“BASS BOOST” ➜ “BAL 0” ➜ “FAD 0” ➜

Last function mode.

●When “IMPACT” is set

“IMPACT” ➜ “BAL 0” ➜ “FAD 0” ➜ Last

function mode.

●When “EXCITE” is set

“EXCITE” ➜ “BAL 0” ➜ “FAD 0” ➜ Last

function mode.

●When “CUSTOM” is set

“BASS <G 0>” ➜ “TREB <G 0>” ➜ “BAL 0”

➜ “FAD 0” ➜ Last function mode.

●When “Z+ OFF” is set

“BAL 0” ➜ “FAD 0” ➜ Last function mode.

Adjusting the bass (Gain,

Frequency, Q-curve)

This adjustment can be performed when the Z-

Enhancer Plus is set to “CUSTOM”.

1. Press the [A-M] button and select

“BASS <G 0>”.

2. Turning the [ROTARY] knob clockwise

emphasizes the bass; turning it

counterclockwise attenuates the bass.

∗ The factory default setting is “BASS <G 0>”.

(Adjustment range: –6 to +8)

3. Press the [a, d] lever upward or

downward to select “BASS <F 50>”.

Turn the [ROTARY] knob to select the

frequency.

∗ The factory default setting is “BASS <F 50>”.

(Adjustment 50/80/120 Hz)

4. Press the [a, d] lever upward or

downward to select “BASS <Q 1>”.

Turn the [ROTARY] knob to select the Q-

curve.

∗ The factory default setting is “

BASS <Q 1>

”.

(Adjustment 1/1.25/1.5/2)

5. When the adjustment is complete, press the

[A-M] button several times until the function

mode is reached.

Adjusting the treble (Gain,

Frequency)

This adjustment can be performed when the Z-

Enhancer Plus is set to “CUSTOM”.

1. Press the [A-M] button and select

“TREB <G 0>”.

2. Turning the [ROTARY] knob clockwise

emphasizes the treble; turning it

counterclockwise attenuates the treble.

∗ The factory default setting is “TREB <G 0>”.

(Adjustment range: –6 to +6)

3. Press the [a, d] lever upward or

downward to select “TREB <F 12K>”.

Turn the [ROTARY] knob to select the

frequency.

∗ The factory default setting is “TREB <F

12K>”. (Adjustment 8 kHz/12 kHz)

4. When the adjustment is complete, press the

[A-M] button several times until the function

mode is reached.

Adjusting the balance

1. Press the [A-M] button and select “BAL 0”.

2. Turning the [ROTARY] knob clockwise

emphasizes the sound from the right

speaker; turning it counterclockwise

emphasizes the sound from the left speaker.

∗ The factory default setting is “BAL 0”.

(Adjustment range: L13 to R13)

3. When the adjustment is complete, press the

[A-M] button several times until the function

mode is reached.

Adjusting the fader

1. Press the [A-M] button and select “FAD 0”.

2. Turning the [ROTARY] knob clockwise

emphasizes the sound from the front

speakers; turning it counterclockwise

emphasizes the sound from the rear

speakers.

∗ The factory default setting is “FAD 0”.

(Adjustment range: F12 to R12)

3. When the adjustment is complete, press the

[A-M] button several times until the function

mode is reached.

Note:

• During A-M adjustment mode, if no operation is

performed for more than 7 seconds, this mode

can be cancelled and return to previous mode.

Basic Operations

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 29 30

Komentáře k této Příručce

Žádné komentáře