Clarion S400 Uživatelský manuál stáhnout pdf (Strana 34)

QUICK REFERENCE GUIDE

To arm using your remote

➤ You can activate, or arm, the system by pressing on your remote for one

second. When the system arms, you will hear a short siren sound, or chirp, and

the parking lights will flash once. If the vehicle’s power door locks have been

connected to the system, the doors will lock.

To disarm using your remote

➤ To disarm the system, press . You will hear two chirps, and the parking

lights will flash twice. If power locks are connected to the system, the doors will

unlock. If the siren chirps either four or five times when disarming, see

Diagnostics section. This is a previous alarm occurence in your absence.

Arming while driving

➤ Press on your remote for two seconds while the vehicle is running. The

system will chirp once and then once more to indicate that the ignition is on.

Disarming without a remote

➤ Turn on the ignition. Press the Override switch the programmed number of

times within 15 seconds. After five seconds, the system will disarm. If it does

not, you may have waited too long. Turn the ignition off and on and try again.

To enter or exit override mode

➤ Turn ignition to RUN position, then turn to OFF position. Press and release

the Override switch within 10 seconds. The status LED will light solid if you

are entering override mode, and it will go out if you are exiting override mode.

To activate panic mode

➤ Press and hold down for two seconds.

To exit panic mode

➤ Press on the remote.

To activate Silent Arm/Disarm

➤ Press briefly before arming or disarming, and the confirmation chirp(s)

will be eliminated for that one operation only.

Location of Override switch_______________________________

Number of Override switch pulses for disarming_____________

Cut along dotted line and fold for a quick and easy reference to keep in your purse or wallet.

✂✂

1 2 ... 29 30 31 32 33 34 35 36

Žádné komentáře

Clarion S400 Uživatelský manuál Strana 34