9
arming while driving
Your system can be armed while driving the vehicle. Simply press
on your remote for two seconds while the vehicle is running or while
the ignition is on. The siren will chirp once and then once more to indi-
cate that the ignition is on. The security system will not respond to any
input except the door triggers and the Starter Kill (if installed) will not
be activated. The security system will disarm automatically whenever
the ignition is turned off. The siren will chirp twice and the LED will stop
flashing.
disarming
To disarm the system, press . You will hear two chirps, and the
parking lights will flash twice. If the power locks are connected to the
system, the doors will unlock. If the siren chirps either four or five times
when disarming, refer to the Diagnostics section of this guide. This is
alerting you of an alarm in your absence.
silent alarm without disarm
This feature makes it possible to silence and reset the system while it is
triggering, without disarming the system. If the system is triggered and
the siren has been sounding for longer than six seconds, pressing
or on the remote will stop the trigger and return the unit to
the armed state. The system will not disarm, but rather reset. This pre-
vents you from disabling the system should you wish to disarm it with-
nnoottee::
If programmed for the optional Anti-Carjacking system
feature, arming with the remote will arm this feature. (See
Anti-Carjacking System section of this guide.)
Komentáře k této Příručce